Electrical Connection - autosen AU002 Bedienungsanleitung

5 Electrical connection

► Disconnect power.
► Connect device (depending on the type selected):
Cor colours
BK black
BN brown
BU blue
WH white
Colours to DIN EN 60947-5-2
OUT1 Switching output
OUT2 Teach: Programming wire
Cor colours
BK black
BN brown
BU blue
WH white
Colours to DIN EN 60947-5-2
OUT1 Switching output - IO-Link
OUT2 Analogue output
Technical data and further information at → www.autosen.com
6 Set-up
Note the LED behaviour for the set-up:
Echo LED green
On Echo is received.
Off No echo (object / background not detected).
Off For the time of resetting to factory setting.
Status LEDs yellow
Flashes 1 Hz
Flashes 2.5 Hz
Flashes 4 Hz
Flashes 10 Hz
12
2:Teach
Pin 4: IO-Link
Function acknowledgement
Programming mode active.
Setting distance P1 completed.
Setting distance P2 completed or
assignment acknowledgement of the setting.
Inverting the switching characteristics.
BN
L +
WH
BK
BU
L-
AU001-AU003
BN
L +
WH
BK
BU
L-
AU004-AU010
2 1
3 4
2 1
3 4