Axis P5532-E Bedienungsanleitung Seite 10

Page 10
Install AXIS T8123 High PoE Midspan 1-port
Axis T8123 High PoE Midspan enables Axis network video products with high power consumption
to receive data and power over the same Ethernet cable. Follow these instructions to connect
AXIS T8123.
Note:
Axis can only guarantee full functionality with the AXIS T8123, no other High PoE devices
are supported.
1. Connect the AXIS T8123 (Data in) to the network switch using a standard network cable.
2. Connect the AXIS T8123 (Data and Power Out) to the network camera, using the network cable
that has been connected to the camera.
3. Connect the AXIS T8123 to an AC outlet (100-240 VAC), using the supplied power cable.
connectivity
connectivity
indicator
For information on the LEDs on the midspan, see
AXIS T8123
Port
indicator
AC Input
Network camera
AXIS P5532-E/AXIS P5534-E Installation Guide
Data &
Power out Data in
Ethernet
Assign an IP address,
on page 11.