Initial Settings - Mitsubishi Electric PAC-IF013B-E Bedienungshandbuch

5. Remote controller operation

5.3. Initial settings

From the Main display, press "MENU" button, select "Initial setting", and make the remote controller settings on the screen that appears.
· Main/Sub
· Clock
· Main display
· Contrast
· Display details
-Clock
-Temperature
-Room temp.
-Auto mode (Auto cooling/heating operation)
· Auto mode (Auto cooling/heating operation)
· Administrator password
· Language selection
(1) Main/Sub setting
When connecting two remote controllers, one of them needs to be designated as a
sub controller.
(2) Clock setting
Clock setting is necessary for time display, SD card data logging, weekly timer, timer
setting and error history.
Make sure to perform clock setting when the unit is used for the first time or has not
used for a long time.
(3) Main display setting
Use the F3 or F4 button to select the display mode "Full" or "Basic." (The factory
setting is "Full.")
(4) Remote controller display details setting
Make the settings for the remote-controller-related items as necessary.
Press the SELECT button to save the changes.
[1] Clock display
[2] Temperature unit setting
[3] Room temperature display
[4] Auto mode (Auto cooling/heating operation) display setting
(The factory setting is "Yes".)
· Yes: "AUTO COOL" or "AUTO HEAT" is displayed during Auto mode (Auto cooling/
heating operation).
· No: Only "AUTO" is displayed during Auto mode (Auto cooling/heating operation).
(5) Auto mode (Auto cooling/heating operation) setting
· Yes: The Auto mode (Auto cooling/heating operation) can be selected in the
operation mode setting.
· No: The Auto mode (Auto cooling/heating operation) cannot be selected in the
operation mode setting.
(The factory setting is "Yes".)
(6) Administrator password setting
• The initial administrator password is "0000." Change the default password as
necessary to prevent unauthorized access. Have the password available for those
who need it.
• If you forget your administrator password, you can initialize the password to the
default password "0000" by pressing and holding the F1 and F2 buttons
simultaneously for three seconds on the administrator password setting screen.
• The administrator password is required to make the settings for the following items.
· Timer setting
· Weekly timer setting
· Restriction setting
Display details
Clock No 24h
Temperature °C / °F / 1°C
Yes / No
Room temp.
Auto mode Yes / No
Select:
Cursor Change
17