LevelOne WBR-6003 Installationsanleitung Seite 7

Check Your Network Settings
1. Please make sure your PC can get IP address automatically
so the WBR-6003 can communicate with your PC during
configuration.
•
Select "Control Panel" > "Network Connections".
•
Right click the "Local Area Connection" and choose
"Properties".
•
Select the TCP/IP protocol for your network card.
•
Click on the Properties button. You should then see the
following screen and make sure you have selected
"Obtain IP address automatically"
1.
2. Reboot computer to make sure you have received the IP
address correctly from the Router.
3.
2.
4.
7
5.