Waeco AirConServiceCenter ASC5300G Bedienungsanleitung Seite 13

ASC5300G
The following message then appears:
6. Connect the service coupling with the low pressure connection of the
vehicle air conditioning system.
7. Open the low pressure connection.
8. Press ENTER to confirm.
If "Please wait" is flashing, the refrigerant is being analysed. This
process can take up to two minutes.
After successful analysis, the results are output at the printer.
Example:
The following display messages are shown:
9. Close the LP quick coupling and detach it from the air conditioner.
EN
C o n n e c t t h e c o u p l e r
t o t h e A / C s y s t e m
a n d o p e n t h e v a l v e .
E N T E R - O K S T O P - E X I T ⬍
D i s c o n n e c t t h e h o s e
f r o m t h e A / C s y s t e m .
.
E N T E R - O K
Operation
13