Wrapping Modes; Single Wrapping; Splash Proof-Mode; Double Wrapping - ITW Mima GIROTEC PL Betriebsanleitung

WRAPPING MODES

3.1 Single wrapping

Wrapping cycle:
1. Selected number of turns at
the bottom
2. Spiral pattern, with uniform
overlap, and the selected
number of turns will be
applied at the top
3.2 Splash proof- mode
Wrapping cycle:
1. Selected number of turns at the
bottom.
2. Spiral pattern, with uniform
overlap, from bottom to top.
3. Machine stops. Place the
supplementary cover over the
product.
4. Press START button
5. Selected number of top wrapping
layers.
6. Spiral pattern from top to
bottom.

3.3 Double wrapping

Wrapping cycle:
1. Selected number of turns at
the bottom.
2. Spiral pattern, with uniform
overlap, from bottom to top
and the previously selected
number of turns will be applied
at the top
3. Spiral pattern, with uniform
overlap, from top to bottom.
5