Wrapping - ITW Mima GIROTEC PL Betriebsanleitung

OPERATION

2.6 Wrapping

ST/STB and WT: RDL and PL/PLB:
1. Move the catch
1. Move the packaged
goods with a low lift downwards to
platform truck or fork horizontal position.
lift truck to the pallet (RDL)
end stop, so that the
wrapping arm does
not touch the pallet
during the wrapping 2. Move the system
process. under the pallet with
the packaged goods
3. Pull the film out
2. Pull the film out far
enough to enable it to far enough to enable
be fastened to the it to be fastened to
corner of the pallet. the corner of the
pallet. Tie the film
Tie the film firmly to
firmly to the pallet.
the pallet.
3. Press the Start 4. Press the Start
button button
4