G&D DL-DVI-Vision-Fiber Serie Installation Und Bedienung Seite 76

Installation
Activate the
generic HID
to connect another USB input device. In this mode, any data of the USB input device
is not altered when transmitted to the computer module.
IMPORTANT: If the
keyboard connected to the
Connect the PS/2 mouse of the console.
Mouse:
Keyb.: Connect the PS/2 keyboard of the console.
Connecting the console monitor
USB 2.0 Trans.
Transmission
Connect the console monitor.
DVI-D DL Out:
Establishing a connection to the computer module
USB 2.0 Trans.
Transmission
IMPORTANT:
The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and the cable
plugs.
Insert the LC plug of the fibre optic cable connected to the Transmis-
Transmission|Tx:
sion|Rx interface of the computer module.
Insert the LC plug of the fibre optic cable connected to the Transmis-
Transmission|Rx:
sion|Tx interface of the computer module.
7 · G&D DL-DVI-Vision-Fiber
mode (see Selecting the USB-HID mode on page 37) if you want
mode is active, the OSD cannot be operated by a
generic HID
socket.
Generic
Serial
USB 2.0 Devices
DVI-D DL Out Micro In Speaker
Serial
USB 2.0 Devices
DVI-D DL Out Micro In Speaker
Mouse
Generic
Keyb./Mouse Keyb. Red. Power
Mouse
Generic
Keyb./Mouse Keyb. Red. Power