Reducing The Colour Depth Of The Image Data To Be Transmitted - G&D DL-DVI-Vision-Fiber Serie Installation Und Bedienung

Configuration
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. In the
EDID profile
ing options:
[Auto]
GUD DVI ...
Name
6. Click on
Save

Reducing the colour depth of the image data to be transmitted

In the default settings, the KVM extender transmits the image information with a
maximum colour depth of 24 bit to the user module.
Using a high resolution and displaying moving images can result in the user module
"skipping" several images.
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
NOTE: Depending on the image contents, reducing the colour depth may result in
slight colour grades.
How to change the colour depth of the image data to be transmitted:
1. Press
Ctrl+Num
2. Select the row
3. Under
Color depth
 transmits the image data with a maximum colour depth
24 Bit:
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
4. Press to save your settings.
F2
33 · G&D DL-DVI-Vision-Fiber
KVM extender
.
Video channels
.
Configuration
field of the
Video channel
 automatic treatment of EDID data default)
 sue of a G&D profile for a particular resolution
 EDID profile that has been read out by the user
.
(default) to open the on-screen display.
and press
Target setup
press to select on of the following options:
F8
.
.
section, select between the follow-
.
Enter