Efco TN2700-CR270 Bedienungsanleitung Seite 80

Starting the machine
1. Release clutch lever (A). This
way the brake is engaged.
2. Put throttle lever (B) in "high"
position (C).
3. For engine start operations, refer
to instructions mentioned in the
engine's "Use and Maintenance"
handbook.
4. Move forward, turn, change
speed and then stop the engine.
DANGER
o Accelerate and decelerate
slowly when moving forward and
stopping.
• Decrease speed when turning.
• Decrease speed when travelling
downhill, on a wayside of a road,
on uneven roads or with many
bends.
• Don't travel slantwise on a
steep slope.
• When reversing, make sure to
use a slow speed and pay attention
to what you have behind.
WARNING
• Check the position of each
lever and the safety of the area
around before moving forward.
• Do not use the axle shafts un-
lock lever when travelling down-
hill.
CAUTION
If the machine is left unattended,
make sure that it is on a flat and
stable surface and switch the en-
gine off so that crawlers do not
move.
19