Troubleshooting - Imperial DABMAN i500 BT Bedienungsanleitung

13. Troubleshooting

Fault
No display, radio
does not respond
Operation via remote
control is not pos-
sible
Poor DAB+ reception No stations available Perform a scan Antenna not fully ex-
Weak FM reception
Bad audio quality of
music playback
Volume too low
Network connection
cannot be estab-
lished
Possible cause and solution
Connect the device to the mains using the power supply unit
included with the radio.
Batteries empty or positioned incorrectly. Please check
whether the batteries are inserted in the correct direction.
tended.
Change the location of the radio (possibly closer to a window),
perform another scan
Antenna not fully extended, Extend the FM antenna to its full
length. Change the location of the radio
Low bit rate file. Check the audio file. Tip: For MP3 files, the
bitrate should be 192 kbit/s or higher.
Check the volume setting on the i500 Check the volume set-
ting of the paired device that the music is playing from.
Check the WLAN function
Activate the DHCP function of the router that the radio is
connected to.
A firewall may be active in the network.
93 IMPERIAL DABMAN i500 BT
E