Imperial DABMAN i500 BT Bedienungsanleitung Seite 86

If you don't like any of the pre-sets, you can also create and save your own under „My
equalisers configuration".
Bass and treble can be raised or lowered by 14 dB.
You can then find your saved settings via „My equalisers".
Internet settings
Here you can adjust your radio's network settings.
Network wizard
Here - if desired or necessary - you can choose another network.
For WLAN networks that you have already logged into, you don't need to enter the pass-
word again.
E
PBC WLAN setup
PBC stands for „push button configuration". Here you can connect your DABMAN i500
BT to your router via WPS (WiFi-protected setup) if the router supports this feature. You
will find more information in the manual for your router.
Show settings
Shows all relevant information about your DABMAN i500 BT's current connection to
your network. Among other things, you can check whether WLAN or DHCP are active, or
how the MAC address, SSID, IP address or primary DNS are running.
WLAN region
In some cases, other countries (or continents) also have other WLAN frequencies and
transmitter power outputs. For example, if you want to take your DABMAN i500 BT with
you to the US, it makes sense to inform the device of this here.
Manual settings
Here you can switch between „cable" and „wireless", enable or disable DHCP and much
more.
NetRemote PIN setup
Here you can change the PIN code for remote access to your DABMAN i500 BT. The
default is „1234".
If you choose to make use of this feature, we urge you to please change this somewhat
unoriginal password.
Remove network profiles
Do you want to pass on your DABMAN i500 BT but you'd like to remove access to your
network first? You can easily do that here.
Operating Manual
86