Installation - GI.BI.DI F4 PLUS Bedienungsanleitung

F4 PLUS
Control unit
Type
Power supply
Motor power supply
No. of motors
Accessory power supply
Flashlight
Radio receiver
Operating temperature
Run time
TECHNICAL SPECIFICATIONS / FUNCTIONS
The F4PLUS electronic control unit for automation of motors for swing gates or sliding gates is in conformity with the
directives in force.
It offers a complete operating range (condominium, step-by-step, step-by-step with automatic reclosing, pedestrian
gate, water hammer) and adjustment functions (run time, pause time, phase shift and motor power).
It is versatile because of its options (4 limit switches, pre-flashing, flashlight controlled by control unit, courtesy light,
cut-out of unused inputs with dip switches, built-in or plug-in radio).
Easy to install thanks to the control LEDs (red for the safety switches = NC contacts, yellow for the controls = NA
contacts); the extractable terminal boards and the silk-screen printing on the printed circuit indicating connections
and functions.

INSTALLATION

Use glands adequate to ensure proper mechanical connection of cable and maintain the box protection degree IP55.
(2).
2
F4 PLUS/AS04180
230 VAC electronic control unit for automation of one
or two motors for swing gates, sliding gates,
overhead doors and barriers
220 / 230VAC, single-phase, 50/60 Hz
220 / 230 Vdc
24 Vac 8W max
230Vac 40W max
-20°C +60°C
100s max
1 o 2
Plug-in
9
UK