Fixing The Mounting Frame To The Wall - Lenze L-force Controls CS 5000 DVI Montageanleitung

4.2.3

Fixing the mounting frame to the wall

Without add−on component

„
How to proceed:
1. Prepare the wall for mounting the wall bracket 0.
–
The mounting location and the installation material must provide for a
permanent mechanical connection.
2. Stick the self−adhesive seal 1 on the adapter plate 2 on the side with the
threaded bolts.
3. Screw the wall bracket 0 and the adapter plate 2 to the swivel adapter 3.
2 x 4 countersunk head screws M5 x 16 mm with washers Æ 5.3 mm
–
and nuts M5
4. Pull the connecting cable through the swivel adapter 3 and screw the
swivel adapter to the wall.
5. Screw the mounting frame 6 to the swivel adapter 3.
4 nuts M5 with washers Æ 5.3 mm
–
Now you can connect the Command Station (¶ 33).
MA_CSx0xx DE/EN/FR/ES/IT 2.0
Fixing the mounting frame to the wall
160
0
70
3
l
Installation
Mounting steps
‚
1
2
…
ƒ
2
0
3
6
3
CS57x0−010
4
31