Seite 1
Controls LDCDS−CPC5100 L−force .;T/ Betriebsanleitung Operating Instructions Industrial PC M IC D IO CPC 5100 Schaltschrank−PC Control cabinet PC...
Seite 2
Lesen Sie zuerst diese Anleitung, bevor Sie mit den Arbeiten beginnen! Beachten Sie die enthaltenen Sicherheitshinweise. Please read these instructions before you start working! Follow the enclosed safety instructions.
Seite 3
KEYB MOUSE COM1 < STANDBY POWER AUDIO CTRL RESET > CPC5100−001...
Seite 4
Elemente Pos. Beschreibung Schaltschrank−PC Netzanschluss 115 ... 230 V AC Netzschalter von links nach rechts: Tastatur−Anschluss (PS/2) Maus−Anschluss (PS/2) von links nach rechts: Analoger Monitoranschluss (VGA) Serielle Schnittstelle (COM1) 8 x USB−A 2 x Ethernet (RJ45) von links nach rechts: Mikrofon Audio Line−Out Audio Line−In...
Sicherheitshinweise Definition der verwendeten Hinweise Sicherheitshinweise Definition der verwendeten Hinweise Um auf Gefahren und wichtige Informationen hinzuweisen, werden in dieser Dokumenta- tion folgende Piktogramme und Signalwörter verwendet: Sicherheitshinweise Aufbau der Sicherheitshinweise: Gefahr! (kennzeichnet die Art und die Schwere der Gefahr) Hinweistext (beschreibt die Gefahr und gibt Hinweise, wie sie vermieden werden kann) Piktogramm und Signalwort...
Sicherheitshinweise Definition der verwendeten Hinweise Spezielle Sicherheitshinweise und Anwendungshinweise für UL und UR Piktogramm und Signalwort Bedeutung Sicherheitshinweis oder Anwendungshinweis für den Betrieb ei- nes UL−approbierten Geräts in UL−approbierten Anlagen. Warnings! Möglicherweise wird das Antriebssystem nicht UL−gerecht betrie- ben, wenn nicht die entsprechenden Maßnahmen getroffen werden.
Sicherheitshinweise Allgemeine Sicherheitshinweise Allgemeine Sicherheitshinweise Das Gerät darf nur von qualifiziertem Fachpersonal installiert und gewartet werden, ƒ das mit den geltenden nationalen Normen vertraut ist. Das Gerät ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich ƒ Funkstörungen verursachen. In diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.
Überprüfen Sie nach Erhalt der Lieferung sofort, ob der Lieferumfang mit den Warenbegleitpapieren übereinstimmt. Für nachträglich reklamierte Mängel übernehmen wir keine Gewährleistung. Reklamieren Sie erkennbare Transportschäden sofort beim Anlieferer. ƒ erkennbare Mängel / Unvollständigkeit sofort bei der zuständigen ƒ Lenze−Vertretung. LDCDS−CPC5100 DE/EN 1.1...
Gerätebeschreibung Bestimmungsgemäße Verwendung Bestimmungsgemäße Verwendung Der Schaltschrank−PC wird bestimmungsgemäß verwendet, wenn er ausschließlich zur Umsetzung von Bedienkonzepten oder zur Darbietung von Informationen in gewöhnli- chen industriellen und gewerblichen Bereichen eingesetzt wird. Eine andere oder darüber hinaus gehende Verwendung ist nicht zulässig. Eine nichtbestimmungsgemäße Verwendung liegt auch bei einem Gebrauch vor, der ver- hängnisvolle Risiken oder Gefahren birgt, die ohne Sicherstellung außergewöhnlich hoher Sicherheitsmaßnahmen zu Tod, Verletzung oder Sachschaden führen können.
Gerätebeschreibung Grundgerät Grundgerät Allgemeine Eigenschaften Ausführung PC−Gehäuse aus chromatiertem Stahlblech mit Lüfter (Überdruckbe- trieb) Aufkleber aus Polyesterfolie Montage Zum Einbau in Schaltschränke oder Maschinenverkleidungen Elektrische Versorgung Netzteil 115 ... 230 V AC, 350 W Optional USV (Shutdown−Software und Batteriepack) Betriebssystem Optional Windowsâ...
Gerätebeschreibung Grundgerät Mainboard 2.3.1 Mainboard Die folgende Abbildung zeigt das KT965/ATXE−Mainboard. Hinweis! Informationen zum Mainboard entnehmen Sie bitte der separaten Mainboard−Dokumentation auf der Handbuch−CD. Der Typ des eingesetzten Mainboards ist im Gerätepass zu Ihrem IPC genannt. Folgende Schnittstellen sind im KT965/ATXE−Mainboard−Handbuch beschrieben, werden aber nicht unterstützt: Printer−Port ƒ...
Gerätebeschreibung Grundgerät Netzteil 2.3.2 Netzteil Hinweis! Informationen zum Netzteil entnehmen Sie bitte der separaten Netzteil−Dokumentation auf der Handbuch−CD. Der Typ des eingesetzten Netzteils ist im Gerätepass zu Ihrem IPC genannt. Wenn der IPC mit einem USV−Netzteil ausgestattet ist, befindet sich innerhalb des Geräte- gehäuses ein Batteriepack.
Technische Daten Allgemeine Daten und Einsatzbedingungen Technische Daten Allgemeine Daten und Einsatzbedingungen Konformität und Approbation Konformität EN 61000 6−2 (4) EMV−Richtlinie Industriebereich EN 55022, EN 55024 Einrichtungen der Informationstechnik Personenschutz und Geräteschutz Schutzart IP20 Schutzklasse Montagebedingungen Einbauort Schaltschrank Einbaulage vertikal mit Netzteil−Lüfter oben oder horizontal mit Geräte−Lüfter oben Umgebungsbedingungen Klimatisch...
Technische Daten Elektrische Daten Mainboard Elektrische Daten 3.2.1 Mainboard Hinweis! Informationen zum Mainboard entnehmen Sie bitte der separaten Mainboard−Dokumentation auf der Handbuch−CD. Der Typ des eingesetzten Mainboards ist im Gerätepass zu Ihrem IPC genannt. 3.2.2 Netzteil Hinweis! Informationen zum Netzteil entnehmen Sie bitte der separaten Netzteil−Dokumentation auf der Handbuch−CD.
Mechanische Installation Wichtige Hinweise Mechanische Installation Wichtige Hinweise Die Installation darf nur von qualifiziertem Fachpersonal durchgeführt werden, das mit den geltenden nationalen Normen vertraut ist. Montageschritte So gehen Sie bei der Montage vor: 1. Kontrollieren, dass der Einbauort die in den Technischen Daten genannten Einsatzbedingungen gewährleistet (¶...
Elektrische Installation Wichtige Hinweise Elektrische Installation Wichtige Hinweise Die Installation darf nur von qualifiziertem Fachpersonal durchgeführt werden, das mit den geltenden nationalen Normen vertraut ist. Stop! Kurzschluss und statische Entladungen Das Gerät enthält Bauelemente, die bei Kurzschluss oder statischer Entladung gefährdet sind.
Seite 21
Elektrische Installation Wichtige Hinweise Stop! Kein Geräteschutz für zu hohe Eingangsspannung Der Spannungseingang ist intern nicht abgesichert. Mögliche Folgen: Zerstörung des Gerätes bei zu hoher Eingangsspannung. ƒ Schutzmaßnahmen: Beachten Sie die maximal zulässige Eingangsspannung. ƒ Sichern Sie das Gerät eingangsseitig fachgerecht gegen ƒ...
+3.3 und +5 − < 100 + 3,3 und + 5 und + 12 − < 100 Die angegebenen Werte können je nach Netzteiltyp variieren. Für genauere Informatio- nen wenden Sie sich bitte an den Lenze−Service. SLOT A CPC5100−004 LDCDS−CPC5100 DE/EN 1.1...
Seite 23
Elektrische Installation Erweiterungskarten montieren So montieren Sie Erweiterungskarten: 1. Netzkabel 0 und alle externen Anschlüsse ziehen. 2. Gerät von der Schaltschrankwand nehmen und waagerecht, mit den Schrauben 1 nach oben, auf einen Tisch legen. 3. Gehäuse öffnen: – Zwei Schrauben 1 lösen. –...
Elektrische Installation Batteriepack der optionalen USV an− und abklemmen Batteriepack der optionalen USV an− und abklemmen Für die USV−Funktionalität muss das Batteriepack vor der Inbetriebnahme des IPCs ange- klemmt werden. Wenn der IPC eine längere Zeit vom Netz getrennt ist (z. B. Transport, Lagerung), muss das Batteriepack abgeklemmt werden, da andernfalls die Akkus des Batteriepacks durch eine Tiefentladung beschädigt werden können.
Seite 25
Elektrische Installation Batteriepack der optionalen USV an− und abklemmen Netzteil Typ B KEYB MOUSE COM1 STANDBY POWER AUDIO CTRL RESET CPC5100−010 So klemmen Sie das Batteriepack 0 an bzw. ab: 1. Zwei Schrauben 1 enfernen. 2. Gehäusedeckel 2 vorsichtig etwas nach rechts drücken und nach vorne abziehen (bei vertikale Montage, siehe Abbildung).
Wartung Wartung Stop! Kurzschluss und statische Entladungen Das Gerät enthält Bauelemente, die bei Kurzschluss oder statischer Entladung gefährdet sind. Eine besondere Gefahr besteht, weil für die folgenden Arbeiten das Gerätegehäuse bei anliegender Spannung geöffnet werden muss: Anklemmen und Abklemmen des Batteriepacks zur optionalen USV (¶ 24). ƒ...
Wartung Kontrollarbeiten Kontrollarbeiten Das Gerät ist wartungsfrei. Trotzdem müssen Sie in regelmäßigen und unter Berücksichti- gung der Umgebungsbedingungen ausreichend kurzen Intervallen eine Sichtprüfung durchführen. Kontrollieren Sie: Entspricht die Umgebung des Gerätes noch den in den Technischen Daten ƒ genannten Einsatzbedingungen? Behindert kein Staub oder Schmutz die Wärmeabfuhr des Gerätes? ƒ...
7.1.2 Software installieren Die Software ist werksseitig vorinstalliert, wenn Sie die Option ˜mit USV˜ bei der Bestel- lung angegeben haben und Sie das Betriebssystem auf einem Speichermedium von Lenze Digitec bezogen haben. In anderen Fällen: 1. Setup−Programm auf der Programm−CD starten und den Anweisungen des Setup−Assistenten folgen.
Seite 30
Anhang USV−Software Lenze Digitec−USV Software installieren USV: Wählen Sie aus der Liste den Typ "MPS1068/AUP−X−300−V4" Programm ausführen: Während die USV−Software bei Netzausfall die Sekunden bis zum Shutdown herunterzählt, kann ein externes Programm gestartet werden. Tragen Sie hier das Programm ein (¶ 32).
Anhang USV−Software Lenze Digitec−USV Software konfigurieren 7.1.3 Software konfigurieren 1. Doppelklick auf dem USV−Icon im Infobereich der Windows−Taskleiste ausführen. Der Dialog "USV" wird geöffnet. Über die Register dieses Dialogs haben Sie Zugriff auf den aktuellen Status der USV sowie auf alle Einstellungen (¶ 29).
Anhang USV−Software Lenze Digitec−USV Meldung bei Netzausfall 7.1.4 Meldung bei Netzausfall Wenn während des Betriebes das Netz ausfällt, übernimmt die USV die Versorgung des Rechners und ein Dialog wird eingeblendet: Wenn in den Einstellungen das Kontrollfeld Warten bis zum battery−low−Signal ...
Anhang RAID−System RAID−System Ein RAID−System dient zur Organisation mehrerer physischer Festplatten eines Compu- ters. Der Betrieb eines RAID−Systems setzt mindestens zwei Festplatten voraus, die einen Verbund bilden. Mögliche Vorteile eines RAID−Systems: Erhöhung der Ausfallsicherheit (Redundanz) ƒ Steigerung der Transferrate ƒ Aufbau großer logischer Laufwerke ƒ...
Anhang RAID−System Software installieren 7.2.1 Software installieren Hinweis! Das entsprechende RAID−System muss vor der Windows XP−Installation im BIOS eingestellt werden. 1. IPC einschalten und BIOS−Einstellungen aufrufen. 2. Folgende Einstellungen im BIOS vornehmen: – Advanced −> IDE Configuration −> Configure S−ATA#1 as RAID –...
Seite 36
Elements Pos. Description Control cabinet PC Mains connection 115 ... 230 V AC Mains switch From left to right: Keyboard connection (PS/2) Mouse connection (PS/2) From left to right: Analog monitor connection (VGA) Serial interface (COM1) 8 x USB−A 2 x Ethernet (RJ45) From left to right: Microphone Audio line−out...
Seite 37
Validity These instructions are valid for ƒ CPC 5100 control cabinet PC Identification Lenze Digitec Controls GmbH Grünstr. 36 • D-40667 Meerbusch LISTED IND. CONT. EQ. 14ZZ File E236341 Input certified 107AT12345 ...
Safety instructions Definition of notes used Safety instructions Definition of notes used The following pictographs and signal words are used in this documentation to indicate dangers and important information: Safety instructions Structure of safety instructions: Danger! (characterises the type and severity of danger) Note (describes the danger and gives information about how to prevent dangerous situations)
Safety instructions General safety instructions General safety instructions The device must be installed and maintained by qualified, skilled personnel familiar ƒ with the applicable national standards. The device is classified as a class A device and can cause radio interference in ƒ...
After receipt of the delivery, check immediately whether the items match the accompanying papers. We do not accept any liability for deficiencies claimed subsequently. Claim visible transport damage immediately to the forwarder ƒ visible deficiencies/incompleteness immediately to your Lenze ƒ representative. LDCDS−CPC5100 DE/EN 1.1...
Device description Application as directed Application as directed The control cabinet PC is used as directed if it is solely used for implementing operating concepts or for presenting information in usual industrial and commercial fields. A different use, or one beyond these purposes, is not permissible. A use that is not intended also includes a use harbouring fatal risks or dangers which, without the provision of exceptionally high safety measures, may result in death, injury or damage to material assets.
Device description Standard device Standard device General features Design PC housing of chromated sheet steel with fan (overpressure operation) Label of polyester foil Mounting For installation in control cabinets or machine casings Electrical supply Power supply unit 115 ... 230 V AC, 350 W Optional UPS (shutdown software and battery pack) Operating system Optional Windowsâ...
Device description Standard device Mainboard 2.3.1 Mainboard The following illustration shows the KT965/ATXE mainboard. Note! For information on the mainboard please see the separate documentation for the mainboard on the manual CD. The type of the mainboard used is specified in the device pass card for your IPC.
Device description Standard device Power supply unit 2.3.2 Power supply unit Note! For information on the power supply unit please see the separate documentation for the power supply unit on the manual CD. The type of the power supply unit used is specified in the device pass card for your IPC.
Technical data General data and operating conditions Technical data General data and operating conditions Conformity and approval Conformity EN 61000 6−2 (4) EMC Directive for industrial premises EN 55022, EN 55024 Equipment of information technology Protection of persons and equipment Enclosure IP20 Class of protection...
Technical data Electrical data Mainboard Electrical data 3.2.1 Mainboard Note! For information on the mainboard please see the separate documentation for the mainboard on the manual CD. The type of the mainboard used is specified in the device pass card for your IPC.
Technical data Mechanical data Mechanical data Designs and weights Housing Mass [kg] Without battery pack: 12.2 CPC 5100 Sheet steel With battery pack: 15.0 Ø6.5 Ø15 KEYB MOUSE COM1 STANDBY POWER AUDIO CTRL RESET Luft 316.5 CPC5100−002 All dimensions in millimetres.
Mechanical installation Important notes Mechanical installation Important notes The installation must be carried out by qualified, skilled personnel familiar with the applicable national standards. Mounting steps Proceed as follows for the mounting: 1. Check that the installation location meets the operating conditions specified in the technical data (¶...
Electrical installation Important notes Electrical installation Important notes The installation must be carried out by qualified, skilled personnel familiar with the applicable national standards. Stop! Short circuit and static discharges The device contains components that are endangered in the case of short circuit or static discharge.
Seite 52
Electrical installation Important notes Stop! No device protection against excessive input voltage The voltage input is not fused internally. Possible consequences: The device can be destroyed when the input voltage is too high. ƒ Protective measures: Observe the max. permissible input voltage. ƒ...
+ 3.3 and + 5 and + 12 − < 100 The values specified may vary according to the type of power supply unit. For more detailed information, please refer to the Lenze service. SLOT A CPC5100−004 LDCDS−CPC5100 DE/EN 1.1...
Seite 54
Electrical installation Installing the expansion cards How to mount the expansion cards: 1. Disconnect the mains cable 0 and all external connections. 2. Remove the device from the control cabinet wall and place it on a table horizontally with the screws 1 facing upwards. 3.
Electrical installation Connecting and disconnecting the battery pack of the optional UPS Connecting and disconnecting the battery pack of the optional UPS For the UPS functionality the battery pack has to be attached before commissioning the IPC. If the IPC is disconnected from the mains for a longer time (e. g. transport, storage), the battery pack has to be disconnected, as otherwise the rechargeable batteries of the battery pack may be damaged by an exhaustive discharge.
Seite 56
Electrical installation Connecting and disconnecting the battery pack of the optional UPS Netzteil Typ B KEYB MOUSE COM1 STANDBY POWER AUDIO CTRL RESET CPC5100−010 How to connect or disconnect the battery pack 0: 1. Remove the two screws 1. 2. Carefully push the housing cover 2 slightly to the right and pull it forward (for vertical mounting see illustration).
Maintenance Maintenance Stop! Short circuit and static discharges The device contains components that are endangered in the case of short circuit or static discharge. A particular danger occurs because for the following operations the device housing has to be opened during a voltage is applied: Connection and disconnection of the battery pack for the optional UPS ƒ...
Maintenance Regular checks Regular checks The device is free of maintenance. Nevertheless, visual inspections should be carried out at regular intervals which must not be too long, depending on the ambient conditions. Please check the following: Does the environment of the device meet the operating conditions specified in the ƒ...
Maintenance Repair Opening the PC housing Repair 6.2.1 Opening the PC housing KEYB MOUSE COM1 STANDBY POWER AUDIO CTRL RESET CPC5100−003 How to remove the housing cover: 1. Disconnect the mains cable 0. 2. Loosen the two screws 1. 3. Carefully push the housing cover 2 slightly to the right and pull it forward (for vertical mounting see illustration).
UPS software Lenze Digitec UPS 7.1.1 Important notes The optional UPS is controlled via the Lenze Digitec UPS software, software version ƒ 3.3.1 or higher. A reliable shutdown through the UPS in the case of a mains voltage failure can only ƒ...
Seite 61
Appendix UPS software Lenze Digitec UPS Installing software UPS: Select the type "MPS1068/AUP−X−300−V4" from the list. Execute program: While the UPS software in the case of a mains failure counts down the seconds until shutdown, an external program can be started. Enter the program here (¶...
Appendix UPS software Lenze Digitec UPS Configuring the software 7.1.3 Configuring the software 1. Double−click the UPS icon in the info area of the Windows task bar. The "UPS" dialog appears. Via the tabs of the dialog you have access to the current status of the UPS and to all settings (¶...
Appendix UPS software Lenze Digitec UPS Message in the case of a mains failure 7.1.4 Message in the case of a mains failure If a mains failure occurs during operation, the UPS takes over the supply of the computer and a dialog appears: When the Wait until battery−low signal checkbox is...
Appendix RAID system RAID system A RAID system serves to organise several physical hard disks of a computer. The operation of a RAID system requires at least two hard disks that form an interconnection. Possible advantages of a RAID system: Increasing the security (redundancy) ƒ...
Appendix RAID system Installing software 7.2.1 Installing software Note! The corresponding RAID system has to be set in the BIOS before the Windows XP installation. 1. Switch on the IPC and call the BIOS settings. 2. Carry out the following settings in the BIOS: –...
Index Index Power supply unit, 46 , 48 Ambient conditions Identification, 37 − climatic, 47 Radio interference, 41 In case of error, behaviour, 41 − site altitude, 47 RAID system, 64 Installation, electrical, 51 Application as directed, 43 Installation, mechanical, 50 Safety instructions, 40 Installing the expansion cards, −...