wacaco nanopresso Bedienungsanleitung Seite 3

INSTRUCTIONS
1
Unscrew the outlet head. Remove the filter basket.
Remove the scoop and
4
Unscrew the water tank.
brush from the water tank.
Reverse to transfer all the
powder into the filter basket.
7
Position the filter basket
Tamp hard with the back of the
on the top of the scoop.
scoop and clean up the edge.
MAX LEVEL 80ml
MIN LEVEL 50ml
Add boiling water into the
water tank.
10
Screw tightly the outlet Place water tank on level
head into the main body. and stable surface to fill it.
Hold the Nanopresso with
13
two hands, as showed above.
Unlock the piston from
its travel position. Start pumping above a cup.
4
2 3
Unclips the cup if needed.
Do not unclips the cup if the
water tank is filled with hot water.
5 6
Fill the scoop with fine
coffee grounds (8gr).
8
9
Put back the filter basket on
the top of the main body.
11
12
Screw tightly the main body
onto the water tank.
Avoid burning yourself.
14
The first 8 strokes the pressure
is built. Pump slowly until all
coffee come out.
CLEANING
It's important to respect your machine and clean it regularly. A
good maintenance will allow you to use your Nanopresso for
many years.
After each use clean the hatched areas under running water. Let
the parts dry separately.
From time to time (20 shots), deep clean the portafilter and the
nozzle parts.
Clean up all those parts with hot water and the help of the
provided brush.
Unclip the nozzle part.
1
Unscrew the nozzle.
2
Once every 6 month (300 shots) you will have to clean the filter
mesh and underneath surface.
WARNING
Do not put any Nanopresso parts into dishwasher.
Filter mesh
5