Control Panel; Using The Cooktop Burners - Nordmende CTEC51BK Betriebs- Und Montageanleitungen

4.2. CONTROL PANEL

The control panel of the cooker is shown below.
0

4.3. USING THE COOKTOP BURNERS

The hob part of the appliance is controlled via knob with 7 positions on the control
panel. Position ''0'' means off position. The remaining 6 positions indicate the
following types of use:
The knob rotation direction may differ according to the product specification.
Surfaces of hotplates are covered by a protective layer. At first use, operate the
hotplates without a pan at level 3 for 5 minutes.
Pans with flat base are highly recommended. Also size of pan must be in line with the
size of hob heating elements for most efficient usage. Always center the pan on the
heating element. Using small sized pans on the large sized heating elements will
cause heat loss and so energy will be wasted.
0 0
0 0
1 :Heat maintenance position
2-3 : Heating in low temperature position
4-5-6 :Cooking, frying and boiling position
9
0 0 0 0
0 0