Sharp FZ-40SEF Bedienungsanleitung Seite 4

ENGLISH
HOW TO REPLACE A FILTER
How to remove the filter
1
which has been used
1 Place the unit facing up
Place the unit on a table, etc., so
that the stand does not contact the
surface.
2 Remove the front panel
Press in the hook on the bottom of
the front panel and lift to remove.
3 Remove the pre-filter,
and then stamina-power
carbon(black) which has
been used, and HEPA
filter(white).
2
How to install a new filter
1 Remove the HEPA filter
from the polyvinyl bag
and install it in the main
unit with the
display facing up.
Insert so that the tabs on the HEPA
filter are facing toward you.
Proper operation cannot be
achieved when installing the filter
backwards.
All manuals and user guides at all-guides.com
2
1
Hook
4
Soft cloth
Table, etc.,
Front panel
Pre-filter
Stamina-power carbon
Tabs
Place so stand
does not touch
surface
1
2
1
HEPA filter