Connect To Amplifier - AEG MC 4434 DVD Bedienungsanleitung

CONNECT TO AMPLIFIER

Digital audio output setting
Connect coaxial or optical output of the player to the corresponding inputs of the amplifier. While in pay or stop mode, press the
SETUP button on the remote control to open the system setup page. Use direction buttons to move to Audio setup page; Also,
move the cursor downwards to Digital audio setup by using the direction buttons; then use the Right direction button again to
move to SPDIF setup. Select the digital output and set SPDIF/RAW or SPDIF/PCM. Then press the PLAY/ENTER button to save the
selected value. Finally, press the SETUP button again to exit the setup menu.
Left channel
(Select one of the digital
audio connecting wires)
2
Dolby Amplifier
English
Right channel
27