Specification - AEG MC 4434 DVD Bedienungsanleitung

3. Save Bands
Press the SAVE button to save the current frequency of band. For example: if you want to save 99.3 MHz in 28th cell, press 10+
button twice and 8 button once, press T/F button to input 9 9 3, then press SAVE button.
4. Soundtrack Selection
To select Mono or Stereo while in FM mode, press MO/ST button. When you select stereo, the display shows a stereo signal. If
the signal is not strong enough, you cannot select Stereo.
5. Exit FM Mode
Press the DVD button on the remote control to exit FM status, and switch to DVD mode. The player will star playing if there is a
disc inserted.
(Please adjust the antenna direction to find the strongest signal for each station.)

SPECIFICATION

Disc type
Video format
Audio format
Signal output
Output joint
Input joint
Power supply
Max power
Frequency
S/N ratio for audio signal
Operation condition
Note: *Some MPEG 4 discs are in *. rm/*. ra/*. ram/*.rmm etc format are not supported by this device. Please select carefully before
purchase. The specification is for reference only, subject to change without prior notice.
Waste electrical products should not be disposed of with household waste.
This equipment should be taken to your local recycling centre for safe treatment.
DVD DVCD
VCD SVCD
CD CD-R
MP3 MPEG4
MPEG2 for DVD, and MPEG 1 for VCD
MPEG1, MPEG2, PCM, stereo
Video format: PAL, NTSC, AUTO
Video output: 1 .0Vp-p
Audio: Stereo,1~2V(RMS)
Video output, Audio output,
Optical fiber output,
Coaxial output and Scart output
USB, Multi-media card
~220-240V/50Hz
25W
20Hz-20KHz ±3dB
≥80dB Weight A
Temperature: 5 °C~35 °C
Installation: on the flat horizontal surface
English
37