Private Zone - Abus TVVR33008 Bedienungsanleitung

Arming Schedule
Select the Arming Schedule tab.
Here you set the times at which the reactions set in the
Linkage Action tab are triggered.
1. Select the day and enter the schedule.
Note
Up to eight time slots, between 00:00 and 00:00,
can be defined in each case, but the individual
time slots must not overlap.
2. Under Copy, select whether or not the setting should
be applied to every day of the week and the holiday
settings.
3. Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
Linkage Method
Select the Linkage Action tab.
Here you can configure the response of the recorder in the
event of an alarm by ticking the corresponding box.
Parameter
Full Screen Monitoring
Audible Warning
102
Notifications
The camera is displayed in
full screen in live view.
The device emits a repeated
signal tone.
Notify Surveillance
Centre
Send Email
Trigger Alarm Output

Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.

Private Zone

Select the camera channel to be processed under
"Camera".
Select the checkbox for activating the private zone.
Up to four private zones can be defined per camera.
These are created by drawing the zones with the mouse
in the preview image.
Using "Clear All", all zones are reset simultaneously.
Alternatively, the zones can be cleared individually with
the buttons.
Camera
The CMS sends out a
warning message
An email is sent to a
specified email address. See
page 92.
The alarm output is triggered
in the event of an alarm.