Kensington PowerGuard with BungeeAir Kurzanleitung Seite 18

• On/Off: The fob radio can be turned off by sliding the switch to the "Off" position
as indicated by the Red label. In this position the alarms will not activate, and the
fob and case will not communicate with each other. Remember to turn off your
PowerGuard fob where radio devices are prohibited.
"Find My iPhone 4" Operation
When the iPhone 4 is installed in the PowerGuard case the system will arm and the
"Find My iPhone 4" function will be available.
• Pressing the "Find My iPhone 4" button on the fob will cause the audible alarm to
sound briefly provided the fob and case are in range.
• Pressing the "Find My iPhone 4" button on the fob will also briefly initiate the iPod
"Play" function provided there is music within the iPhone and the case and fob are
in range.
NOTE: Music will play at the set volume level within the phone. Music will play
through the headphones when headphones are connected to the iPhone.
• In both cases the functions initiated by pressing the "Find My iPhone 4" button will
cease after 15 seconds.
• Pressing the "Find my iPhone 4" button a second time will cause the audible alarm
to mute and the iPod function to initiate the "Pause" function provided the fob and
case are in range.
• The "Find My iPhone 4" audible alarm can also be muted from within the BungeeAir
app by tapping on the screen.
Product status
PowerGuard Fob Status Indication
The fob provides the following status indication
System Paired:
System Armed:
System Disarmed: Blink Yellow once
Blink Green 2 times
Blink Green once
"Find my iPhone 4"
Button
Status Indication
LEDs
19