Important Warnings; Grounding Instructions; Machine Data - Nilfisk cfm IVT 1000 CR Bedienungsanleitung

2.2 - Important warnings

Improper Use
The following use of the device is strictly forbidden:
■ Outdoors in case of atmospheric precipitation.
■ When not placed on horizontal levelled grounds.
■ When the filtering unit is not installed.
■ When the vacuum inlet and/or hose are turned to parts
of the human body.
■ When the dust bag is not installed.
■ Use without the guards, protective covers and safety
systems installed by the manufacturer.
■ When the cooling vents are partially or totally clogged.
■ When the vacuum cleaner is covered with plastic or
fabric sheets.
■ When the air outlet is partially or totally closed.
■ When used in narrow areas where there is no fresh air.
■ Vacuuming the following materials:
1. Burning materials (embers, hot ashes, lit cigarettes,
etc.).
2. Naked flames.
3. Combustible gas.
4. Flammable liquids, aggressive fuels (gasoline,
solvents, acids, alkaline solutions, etc.).
5. Explosive dust/substances and/or ones liable to
ignite in a spontaneous way (such as magnesium or
aluminium dusts, etc.).
IMPORTANT: Fraudulent use is not admitted.
CAUTION This appliance is for dry use only and is not to be
used or stored outdoors in wet conditions.
To reduce the risk of fire, electric shock, or injury:
Do not leave the appliance unattended when plugged in.
Unplug from outlet when not in use and for servicing.
Do not allow to be used as a toy.
Close attention is necessary when used by or near children.
Use only as described in this manual.
Use only Manufacture's recommended accessories and spare
parts.
Do not use with damaged cord or plug.
If the appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to a
service center.
Do not pull or carry by cord, use cord as handle, close a door
on cord, or pull cord around sharp edges or corners.
Do not run appliance over cord.
Keep cord away from heated surfaces.
Regularly examine the supply cord for damage, such as
cracking or ageing.
If damage is found, replace the cord before further use.
Only replace the supply cord with the type specified under
"rec. spares" in the instruction manual.
Do not unplug by pulling on cord.
To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any objects into openings.
Do not use with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce airflow.
Keep hair, loose clothing, fingers, and all parts of the body
away from openings and moving parts.
Under no circumstances should the machine be used for pick-
ing up hot material.
In particular the machine must not be used for cleaning open
and closed fireplaces, ovens or similar that contain warm or
C316
gloving ashes.
Do not use without dust bag and/or filters in place.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
The machine must not be used for picking up combustible
or explosive materials, nor should it be used in an explosive
atmosphere.

2.3 - Grounding instructions

This appliance must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock.
The plug must be inserted into an appropriate socket that is
properly installed and grounded in accordance with all local codes
and ordinances.
WARNING – improper connection of the equipment
grounding conductor can result in a risk of electrical shock.
Check with a qualified electrician or service person if you are
in doubt as to whether the outlet is properly grounded.
Do not modify the plug supplied with the appliance – if it will
not fit the socket, have a proper one installed by a qualified
electrician.
Attention!!
Under no circumstances must the user tamper with theequip-
ment.
All attempts by the user or by unauthorised personnel to dis-
mantle, modify or, more generally, tamper with any part of the
vacuum shall void the guarantee.
Contact your nearestAfter-Sales Service Centre in the event
of faults.

3 - Machine data

3.1 - Identification data.
Always state all the identification data on the machinewhen
ever you contact the Manufacturer after sales service. Exact
identification of the machine model and serial number will
help prevent incorrect information from being given.
The identification plate with the machine data is shown in fig. 1
A Type
B Electrical Power
C Serial number - yywwXXXX
(yy=year ww = week XXXX = number
D Operating Frequency
E Dust class Category
F Ref. number
G Voltage
H Max. Current
3.2 - Main parts (fig. 2 / 3 / 4)
The following list of main parts will help users to understand-
the terms used in this manual.
Fig 2 standard machine
1. Motor head incl. handle
2. On / Off button
3. Exhaust filter cover
4. ULPA U 15 exhaust filter
5. Top container
6. Main filter "M" class Goretex® PTFE filter
7. Dust container
8. Stainless steel clamps
9. Trolley
42
02/2013