IMPORTANT
Before mounting, be sure that the engine is in perfect condition.
Check the ignition system, contacts and the spark plugs. These
parts are necessary for the engine Ja-jpafh jts ton performance.
The «FILTER KING» has to be installed on the car-body at
distance of all sources of warmth and engine vibrations. For
installation use the special support delivered togethes with the
«FILTER KING», care for horizontal mounting. After having instal-
led the «FILTER KING» make sure that there will be no leakage
between the fuel pump and the carburettor, fastening the pipe
to the inlet and outlet adapters by the safety- clamps.
Check the idling and eventually adjust it.
A
Outlet
C
B
Knob screw glass
– 7 –
Inlet