Start-Up; Maintenance; Disposal; Troubleshooting - Honeywell NK300soft Einbauanleitung

6. Start-up

For information on start-up, see the instructions of the
individual components (included in scope of delivery)
1. Adjust the back pressure (see EBA-NK300)
2. Adjust the softening level (see EBA-VE300)
3. Fill the system (see EBA-VE300)

7. Maintenance

Maintenance of backflow preventer must be carried out
by authorized personnel!
7.1. Inspection
• Frequency: every 6 month (depending on local
operating conditions)
• To be carried out by an installation company
7.1.1. Inspections to be performed
For information on inspections, see the instructions of
the individual components (included in scope of deli-
very)
1. Pressure reducing valve function control (see EBA-
NK300)
2. Drain valve function control (see EBA-NK300)
7.2. Maintenance
We recommend a planned maintenance contract with
an installation company
In accordance with DIN EN 1717 a regular maintenance must
be taken.
Frequency: every 1-3 years (depending on local opera-
ting conditions)
To be carried out by an installation company
7.2.1. Maintenance tasks to be performed
For information on maintenance, please refer to the
instructions of the individual components (included in
scope of delivery)
1. Valve insert and screen (see EBA-NK300)
2. Maintenance and cleaning of cartridge insert (see EBA-
NK300)
3. Check valve (see EBA-NK300)
4. Replacement of the softening cartridge (see EBA-VE300)
To determine the maximum capacity of the softening
cartridge, see EBA-P300L
MU1H-1546GE23 R0612
GB
7.3. Cleaning
Do not use any cleansers that contain solvents and/or
alcohol for cleaning the plastic parts, because this can
cause damage to the plastic components - water
damage could result.
Detergents must not be allowed to enter the environ-
ment or the sewerage system!

8. Disposal

For information on disposal, please refer to the instruc-
tions of the individual components (included in scope of
delivery)
Observe the local requirements regarding correct waste
recycling/disposal!

9. Troubleshooting

For information on malfunctions / trouble shooting,
please refer to the instructions of the individual compo-
nents (included in scope of delivery)

10. Spare Parts

For information on replacement parts, please refer to
the instructions of the individual components (included
in scope of delivery)

11. Accessories

For information on accessories, please refer to the
instructions of the individual components (included in
scope of delivery)
6 Honeywell GmbH