Scope Of Delivery; Proper Use; Technical Description - Waeco RV-AMP/4 Montage- Und Bedienungsanleitung

RV-AMP4.book Seite 24 Dienstag, 31. Oktober 2006 4:20 16

Scope of delivery

3 Scope of delivery
No. in fig. 4, Quan-
page 5 tity
1
2
3
–
–
–
4

Proper use

RV-AMP/4 is a control box for connecting the WAECO camera models RV-33, RV-20/M
and RV-20CFM with motor-driven protective flaps to a monitor for use as a rear view video
system.
5

Technical description

RV-AMP/4 is a control box designed to connect the WAECO camera models RV-33, RV-
20/M and RV-20CFM with a monitor or the navigation systems NAV-2300 and NAV-7300.
The control box supplies the control signal for the camera's motor-driven protective cap
and the activation signal for the monitor. It also ensures a proper power supply for the
camera.
In default mode, the camera is activated when you switch on the monitor or engage the
reverse gear. The monitor is also activated when you engage the reverse gear.
If a video source in addition to the camera, such as a navigation system or DVD player,
is connected to the monitor, you need to set and connect the control box accordingly. In
that case, the control signal for the camera protective cap is not triggered when you switch
on the monitor but only when you engage the reverse gear.
If you would then like to use the camera when the vehicle is parked or when driving for-
wards, you must install the supplied rocker switch.
The control box provides an additional AV output for the NAV-7300 WAECO navigation
monitor or a second monitor or a video recorder.
The control box can be connected to 12-V to 24-V DC voltage.
24
Description
1 Control box with cable set
1 3-m 6-pin mini DIN connection cable
1 Rocker switch
1 Cinch cable
1 Installation material with cable fasteners
1 Installation and operating instructions
PerfectView Accessory
Item
number
RV-AMP/4
RV-502-M/M
RV-AMP-SW