Source Selection; Select A Source Connected To The Bose ® System; Select A Source Connected To Your Tv; Universal Source Buttons And Console Connectors - Bose SoundTouch 220 Bedienungsanleitung

Source selection

You can switch between sources by pressing the appropriate source button on the
remote control. Before you begin, program the remote to control your source
(see page 24).
Select a source connected to the Bose
If your source is connected to the console and does not use CEC, set the console
to the appropriate mode and turn on the source.
1. Power on the system.
2. Press the button for the source you want to control.
The source button glows.
3.
Press
The source powers on.

Select a source connected to your TV

If your source is connected to your TV, select the appropriate TV input.
1. Power on the system, your TV and the appropriate source.
2.
Press
You may need to press
the source.
On some TVs,
TV input and close this menu.
Universal source buttons and
console connectors
The source buttons on your remote control correspond with the connectors on
the back of the console. For example,
HDMI connector.
™
Your source buttons work with any source that is connected to the corresponding
connector. If you have a secondary DVD or Blu-ray Disc
the CBL-SAT connector, it can be programmed to work with
Note: Ensure you are using the remote code appropriate for the source rather than
the corresponding connector label when programming the remote.
.
to select the input on your TV.
displays a menu. Use the remote control to choose the
®
several times to select the TV input for
corresponds with the BD-DVD
Using the System
system
player and connect it to
™
.
English - 25