Silvercrest IAN 293999 Bedienungs- Und Sicherheitshinweise Seite 43

SENSITIVITY
SETTING
selected .
This feature is used to send a notification prompt to the user when motion is
detected by the camera . Detected events are saved on the microSD card and
are displayed in the "Events" list .
PUSH NOTIFY
SETTINGS
your smart device and enable notifications for this app:
Settings
After the setting is finished, launch the live view and check if the changes have
been applied .
This feature is used to send e-mails to the preset e-mail account .
purpose . If you do not have a Gmail account, please register a Gmail account
E-MAIL SETTING
first .
The user is required to type in the Transmitting e-mail account, Password and
Receiving email account .
e-mail receiver account . Images or video will not be included in the e-mail .
When receiving an alert: Go to your "SilverCrest IP CAM S-K 1920" App to
load the live view of your surveillance camera's monitoring area to check if there
has been an incident (e .g . burglar inside your house) .
2 . Software – Select to use software detection algorithm for motion
triggered recording factor . The software algorithm will track and
detect all minor/major movements that cause changes of picture .
Motion Detection
Set the sensitivity of motion detection during day and night .
Motion Mask
Choose the image areas which should not detect motion .
NOTE: The above 2 options are available only if "Software" mode is
Notify Enable
Enable/disable push notification to your smart device .
Notification Name
Set the name of the camera used to send the push notification .
NOTE: If the push notifications do not work, go to notifications settings on
Notifications
E-mail Alert Enable
Enable/disable e-mail alert messages .
E-mail
Setup the e-mail account for the e-mail alert .
Transmitting e-mail account & Password: Input your email address that
you wish to send from, e .g . JohnDoe@gmail .com .
Receiving e-mail account: Input the email address at which you wish to
receive, e .g . JohnDoe@gmail .com .
NOTE: Transmitting email account needs to use Gmail for email sending
NOTE: Activate the "Use SSL" check box to transmit the data in encryption .
NOTE: Gmail SMTP server (e-mail server) and port is set by default .
NOTE: The e-mail notification system will only send alert notices to your
Silvercrest IP CAM S-K 1920 Allow Notifications .
GB/IE 43