Tagu 23PF1A Anleitung Seite 22

EN
IN WALL OR BRICK FIREPLACES
NOTE: For all in-wall application you will need our FIREBOX INSTALLATION SPECIAL KIT (FISK-23). The
special frame provides proper airflow to the air intake vent and allows for easy fixing in wall or other
constructions and removal of the firebox if the product should need warranty repair.
A new outlet can be installed inside the framing construction. Plug the fireplace into a 13 Amp/240
Volt outlet. If the cord is not long enough you may use an extension cord rated for a minimum of 13
Amps.
For detailed instructions on how to mount the firebox in wall, see the FIREBOX INSTALLATION SPECIAL
KIT instruction manual.
MOUNTING THE FIREBOX
FISK-23
22