Dc Runner 3; Ip X8; Dc Runner; Ac / 50/60 Hz - Aqua Medic DC Runner 1.2 Bedienungsanleitung

Adjustable circulation pump for fresh and salt water aquaria
In purchasing this pump, you have selected a top quality product. It has been specifically developed for aquarium
use and extensively tested by experts.
1. Scope of delivery
DC Runner - adjustable low voltage circulation pump, 24 V DC
•
DC Runner Controller – fully automatic pump control unit with eight different levels for adjusting the
•
output.
Electronic Safety Transformer - Input: AC 110 – 240 V / 50/60 Hz, Output: 24 V DC
•
2. Features and Functionality
The DC Runner are magnetically coupled current pumps and have a fully encapsulated synchronous motor. All
materials are salt-water resistant.
The pumps are operated at 24 V DC safety voltage, with the transformer included. They are controlled via DC
Runner Controller which allows for running a variety of different levels.
The DC Runners are suitable for installation under water and out of water.
3. Technical Data
Type
Power supply pump:
Power supply
transformer:
Pump output:
Max. head:
Power consumption:
Connection suction
side:
Connection pressure
side:
Protection rating:
Fig. 1: DC Runner 1.2
1. Rubber feet
2. Holding plate
3. Pump motor
4. Rear bearing
5. Impeller rotor
6. Front bearing
Operation Manual ENG

DC Runner

DC Runner
1.2 2.2
24 V DC 24 V DC
110-240 V 110-240 V

AC / 50/60 Hz

AC / 50/60 Hz
up to 1,200 up to 2,000
l/h l/h
up to 1.5 m up to 2.2 m
max. 12 watts max. 20 watts
25 mm / ¾" 25 mm / ¾"
20 mm 25 mm / ¾"

IP X8

IP X8
7. Housing's sealing
8. Pump lock
9. Seals for pressure connections
10. Filter basket
11. Sealing plug
DC Runner DC Runner
3.2 5.2
24 V DC 24 V DC
110-240 V 110-240 V
AC / 50/60 Hz AC / 50/60 Hz
up to 3,000 up to 5,000
l/h l/h
up to 2.7 m up to 3.5 m
max. 25 watts max. 50 watts
32 mm / 1" 32 mm / 1"
25 mm / ¾" 32 mm / 1"
IP X8 IP X8
DC Runner
9.2
24 V DC
110-240 V
AC / 50/60 Hz
up to 9,000
l/h
up to 4.8 m
max. 65 watts
40 mm / 1¼"
40 mm / 1¼"
IP X8
5