Cleaning And Maintenence; Troubleshooting - MaxPro MPCD12VDQF/2 Bedienungsanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

rotational speed is diminishing, you have to charge the battery. When you proceed using the drill and the

battery becomes fully discharged, the so-called 'switch of poles effect' can occur. The polarity of the battery

poles will be switched: the '+'will become '-'and the '-'will become the '+'. Once this has occurred the

polarity will remain switched during loading and this will damage the battery irreparable.

When the cordless drill is not being used over a longer period of time, the battery has to be charged

fully first. The battery has to be stored in charged condition.

Battery

The length of service from each charging cycle will depend on the type of work you are doing. The battery

in this drill has been designed to provide maximum trouble free life. However, like all batteries, they will

eventually wear out.

To obtain the longest possible battery life, we suggest the following:

Store and charge your battery in a cool area. Temperatures above or below normal room temperature will

shorten battery life.

Never store batteries in a discharged condition. Recharge them immediately after they are discharged.

All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If

you store your drill for long periods of time without using it, recharge the batteries every month or two.

This practice will prolong battery life.

Make sure that the machine is not live when carrying out maintenance work on the motor.

These machines have been designed to operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning.

Cleaning

Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the

machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and

dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as

petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.

Lubrication

The machine requires no additional lubrication.

Faults

Should a fault occur, e.g. after wear of a part, please contact the service address on the warranty card. In

the back of this manual you find an exploded view showing the parts that can be ordered.

Do not dispose of electric tools, accessories and packaging together with household waste material

- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its

implementation in accordance with national law, electric tools that have reached the end of their life must

be collected separately and returned to an environmentally compatible recycling facility

Fault Symptom

Out of service

Insufficient running

Cordless drill/driver MPCD12VDQF/2 User Manual

As soon as you notice that the power or the maxi mum