Herunterladen Inhalt Inhalt Diese Seite drucken

MaxPro MPCD12VDQF/2 Bedienungsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
e direction reversing switch to the centre in order to lock the appliance in its disabled state.
Only lay down the appliance when it has stopped running completely. Do not place it on a dusty surface as
particles of dust could get into the mechanism.
6
Speed Control
Speed Control
The drill has a 2-speed gearbox and the speed selector is located on the top of the
drill. First gear has a range of 0-350/min and the second gear has a range of
0-1100/min. the speed can be varied from 0 to maximum in switch. This way you can
select the best possible speed for the job required
LED Lights
The drill has 1 LED light built into the unit. The LED light is located above the
variable speed switch.
The LED light turns on automatically when you depress the variable speed switch.
The LED light illuminates dark areas in tight corners to assist with drilling and screw
driving. This helps achieve a more accurate result in your work piece
Charging the battery
9
ttery holder on a flat table and put the battery in the battery holder. Pay attention to + and -
pole markings.
Plug the charger into a power outlet.
The charging process of a fully discharged battery will take approximately 5 hours the first time and
afterwards approximately 3 hours.
As soon as the green trickle charging lamp lights up, charging has been completed and the deviceis ready
for operation.
Discharging the battery
Not only charging batteries is important, discharging is of equal importance or even greater
importance.
drill is diminishing and that the maximum rotational speed is not reached.
can occur. Since during charging only the discharged part of the battery capacity of the battery is being
charged now, the battery can start crystallizing in the one-third that is still charged. This part of the battery
capacity can never be used afterwards.
C C ordless drill/driver MPCD12VDQF/2 User Manual
will illuminate indicating the battery is being charged.
has to be used until you start noticing that the power of the
now you can start charging the battery.
say one-third of capacity, the so-called 'memory effect'
.
GB
7
8
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis