Herunterladen Inhalt Inhalt Diese Seite drucken

ASROCK K10N750SLI-WiFi Schnellinstallationsanleitung Seite 38

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43
Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug
functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Install Windows
2 . 1 5
2 . 1 5
Installing Windows
Installing Windows
2 . 1 5
2 . 1 5 Installing Windows
2 . 1 5
Installing Windows
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit W
64-bit W
64-bit W ith RAID F
64-bit W
64-bit W
TM
TM
TM
TM
TM
If you want to install Windows
TM
Vista
64-bit on your SATA / SATAII HDDs with RAID functions, please follow below
procedures according to the OS you install.
2.15.1 Installing Windows
2.15.1 Installing Windows
2.15.1 Installing Windows
2.15.1 Installing Windows
2.15.1 Installing Windows
F F F F Functions
unctions
unctions
unctions
unctions
If you want to install Windows
with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.14.1 step 2 on
page 36.
If you want to enable Hot Plug function on eSATAII ports but you install OS
on IDE HDD, please skip step 1 and 2.
STEP 3: Set Up BIOS.
Please follow step 1 to set up the BIOS option "SATA Operation Mode" to [RAID].
STEP 4: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 5: Install Windows
You can start to install Windows
®
beginning of Windows
insert the SATA / SATAII driver diskette containing the NVIDIA
the floppy disk, the drivers will be presented. Select the drivers to install. The drivers are
as below:
3 8
3 8
3 8
3 8
3 8
ASRock
Advanced screen
®
TM
TM
Vista
/ Vista
64-bit OS on your system.
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
ith RAID F
ith RAID Functions
ith RAID F
ith RAID F
unctions
unctions
unctions
unctions
®
XP, Windows
®
XP 64-bit, Windows
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
®
®
XP / Windows
®
XP 64-bit on your SATA / SATAII HDDs
Advanced screen
®
XP / XP 64-bit OS on your system.
®
XP / Windows
®
XP 64-bit OS on your system. At the
setup, press F6 to install a third-party RAID driver. When prompted,
K10N750SLI-WiFi
IDE Configuration.
/ / / / /
TM
TM
TM
TM
TM
®
Vista
TM
or Windows
IDE Configuration.
®
RAID driver. After reading
Motherboard
®

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis