Moving The Adjustable Bottle Ledge - Ophardt Rx 5 M Bedienungsanleitung

10. Moving the adjustable bottle ledge

10. Moving the adjustable bottle ledge.
Adjustable bottle ledge
1
3
Note: This dispenser has three positions for the adjustable bottle ledge.
This is to suit a wide variety of bottle heights.
(Position 4 is for bottle storage only.)
Refit the adjustable bottle ledge into a suitable position.
1. Open the dispenser.
2. Lift and rotate the adjustable bottle ledge as shown. (Fig. 1 and 2)
3. Align adjustable bottle ledge tabs with matching openings in the dispenser chassis and remove. (Fig. 3)
4. Move into the new desired position.
5. Swing adjustable bottle ledge back into position and lock in place. (Fig. 3 and 4)
2
4
1
2
3
Instruction manual
Backside
| RX 5 M
17