RX 5 M |
Instruction manual
9. Going into operation
9. Going into operation
Insert the bottle
NOTICE
CAUTION
1
1.
(Locking Dispenser: Art.- No. 4401842) Place key provided in lock slot
and turn 90 deg. (Fig. 1) (FOR KEYED VERSION ONLY)
2.
Place fingers under lifter. Lift and gently pull forward to open. (Fig. 2)
3.
Rotate the drip tray and lifter downward to access the pump and
bottle compartment.
4.
Slide pump and 0.5 L bottle into position as shown. (Fig. 3)
5.
Close the dispenser and turn key 90deg.
16
•
Only open this dispenser when it is fitted to the back plate on the wall
•
Ensure that the drip tray is empty when opening the dispenser
2
1
2
3