Sensor Data Transmission; Clock; Clock Reception - Oregon Scientific RMR203HG Bedienungsanleitung

1.5 m (5 ft)
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:
Press and hold + MODE simultaneously.
The sensor reception icon in the remote sensor area shows
the status:
ICON
TIP
The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn,
England.
To enable / disable signal reception:
Press and hold to enable or
reception.
Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
4
DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be
found.
to disable signal