Setting The Date And Time; Taking A Blood Pressure Measurement - iHealth KN-550BT Bedienungsanleitung

Avoid compression or restriction of the connection tubing during measurement，which may cause
in ation error, or harmful injury due to continuous cu pressure.

4. SETTING THE DATE AND TIME

Insert the batteries in the device and connect it with the iHealth MyVitals App on your smartphone. The
time and date will automatically be updated. If you change the batteries, please readjust the time and date
again.

5. TAKING A BLOOD PRESSURE MEASUREMENT

a. After placing the cu on your arm and relaxing for a few minutes, press the "START/STOP" button. All
display characters are shown for self-test, please contact the service center if segment is missing.
b. The monitor will in ate the cu and then slowly release pressure from the cu as the blood pressure is
measured. When the measurement is nished the blood pressure and pulse rate will be displayed on the
display. The blood pressure will be displayed in di erent colours (green for normal, yellow for slightly
elevated, and red for high) according to the recommendations of the WHO (World Health Organization),
The result will automatically be stored in the memory bank of the monitor.
c. If an Irregular Heartbeat (IHB) is detected during a measurement, the IHB symbol will be displayed
(blinking). If an IHB is detected, the results of the blood pressure measurement may be inaccurate. Please
consult your physician for an accurate assessment.
d. At any time you can synchronize your device with the iHealth MyVitals App so that you can better
manage your blood pressure.
e. The monitor will automatically switch o after one minute to save the batteries. Alternatively, you can
press the "START/STOP" button to turn o the monitor manually.
f. At any time during a measurement, you can interrupt a measurement by pressing the "START/STOP"
button.
6