iHealth KN-550BT Bedienungsanleitung Seite 5

b. Sit with your feet at on the oor without crossing your legs. While seated, place your palm upside in
front of you on a at surface such as a table.Lying Down During Measurement：（You can also lie on your
back and place your left arm straight along your side with your hand palm-side up.） Position the air tube
in the middle of your arm in line with your middle nger.
1/2"(1-2 cm)
c. Close the cu with the Velcro fastener.
d. The cu should t comfortably around your arm. You should be able to insert one nger between your
arm and the cu .
Note: If the cu becomes dirty, remove it from the monitor and wipe it with a lightly moistened soft
cloth. Then air-dry the cu . Do not machine wash.Cleaning the cu after every 200 measurements is
recommended.
3. CONNECTING THE CUFF TO THE DEVICE
Once you have determined that the cu
socket on the side of the monitor. Ensure that the connector is completely inserted to avoid air leakage.
ts your arm (22 – 42cm), simply insert the cu connector into the
5