Winix ZERO+ WiFi Bedienungsanleitung Seite 16

FILTER CARE
2. Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
※ The unit will automatically power off when front panel is opened.
Remove the front panel by grasping its
①
upper edge and gently pulling towards
yourself.
ˍ To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Press the tabs on the top edge to remove
②
1
the Pre-filter.
First remove the 2
③
then the 3 True HEPA filter with Cleancel™
by pulling on the numbered tags at the top
of each filter.
ˍ For optimal performance, only genuine Winix filters should
NOTICE
English
CD Carbon filter and
be used with this unit.
Latch
Tabs
ZERO+ WiFi
16