Daylight Saving Time - Mitsubishi Electric PAR-33MAAG Bedienungsanleitung

Controller operation-Function settings

Daylight saving time

Function description
The start/end time for daylight saving time can be set. The daylight saving time function will be activated
based on the setting contents.
• If a given system has a system controller, disable this setting to keep the correct time.
• At the beginning and the end of daylight saving time, the timer may go into action twice or not at
all.
• This function will not work unless the clock has been set.
Button operation
1
Main
Maintenance
Initial setting
Service
Main display:
Cursor
F1
2
Initial setting menu
Auto mode
Administrator password
Language selection
Daylight saving time
Main menu:
Cursor
F1
52
Main menu
Page
F2 F3 F4
Page
F2 F3 F4
Select "Initial setting" from the Main menu (refer
to page 20), and press the SELECT button.
Move the cursor to the "Daylight saving time"
with the F1 or F2 button, and press the
SELECT button.
P