Audio Connections - Philips HC8900 Handbuch

XP SBC HC 8900/00-1.1

Audio Connections

Audio Connections
Option 1 (figure 4)
Connecting the FM transmitter to a line
output of an audio source, e.g. REC OUT,
LINE OUT.
1 Connect the 3.5mm stereo plug of the
stereo audio cable to the FM transmitter's
3.5mm headphone input.
2 Connect the other 3.5mm stereo plug of
the audio cable (2 m) to the 3.5 mm stereo
plug of the connector cable (20 cm)
3 Connect the 2 RCA plugs of the connector
cable (20 cm) to a line output (REC OUT
or LINE OUT) of an audio source, e.g.TV,
HiFi or PC:
– Check if the red RCA plug (right
channel) is connected to the right
channel (red) of the audio source.
– Check if the white RCA plug (left
channel) is connected to the left channel
(white) of the audio source.
4 Set the transmitter's input selector switch
to 250 mV.
5 Switch on your audio source.The red
power indication LED of the transmitter
lights up if receiving an audio signal.
8
16-08-2001 15:30
6 In case the line output of the audio source
7 Switch on the headphone.You may hear a
8 To tune, press and hold the tuning control
9 Adjust the volume to the desired level with
1 Connect the 3.5mm stereo plug of the
2 Connect the other 3.5mm stereo plug of
Pagina 8
has an adjustable output level, adjust the
line output level of the audio source to the
highest acceptable undistorted level.
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
button for about 1 second. Repeat if
necessary.
the headphone volume control.
Option 2 (figure 5)
Connecting the FM transmitter to a
headphone output of an audio source
stereo audio cable (2 m) to the FM
transmitter's 3.5mm headphone input.
the stereo audio cable (2 m) to the
headphone output of an audio source, such
as TV, HiFi or PC.
– In case your audio source has a 6.3mm
headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.