Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ROADTRIP 52
GB
User manual
USB/Bluetooth section
Roadtrip 52 is equipped with a Bluetooth receiver for wireless recepti-
on of audio data from any external devices like laptops and smartpho-
nes. Before Roadtrip 52 can receive any data via Bluetooth, you must
pair the devices. Proceed as follows:
1) Place the external Bluetooth-enabled device next to
Roadtrip 52 (<10m).
2) Press and hold the PAIR button (1) for about 10 seconds.
3) Next, enter the Roadtrip 52 password in the other device to pair
both devices. The password is preset to „0000"
Now Roadtrip 52 can pair with the external device. As soon as the con-
nection is established, the LED next to the PAIR button permanently
lights green.
1
1
5
5
3
3
In order to terminate the connection, press the PAIR button (1) again:
The LED goes out and Roadtrip 52 is no longer receiving data from the
external Bluetooth device.
NOTE: Roadtrip 52 can only be paired with a single Bluetooth device
at the same time. The distance from the Bluetooth source must not
exceed 10 meters. If no connection can be established, reduce the
distance and try again. The transport functions are controlled via the
external Bluetooth device.
As an alternative to the Bluetooth receiver, you can also connect a USB
stick or a SD card with audio tracks for playback here: the required SD
card reader is included. Roadtrip 52 supports SC cards with a capacity
of up to 32GB and 5,000 music tracks (MP3). You can connect all USB
devices which accept a power supply of 5V 330 mA. When the USB de-
vice is inserted into the USB port (6), the music tracks are automatically
played back. However, you can control various transport functions via
the controls in the USB-/Bluetooth section:
This button (2) starts and pauses audio playback.
Pressing this button (3) once skips to the beginning of the
current song. Press and hold the button to scroll back to the
beginning of the song.
Pressing this button (4) once skips to the beginning of the next
song. Press and hold the button to scroll forward to the end of
the current song.
The MP3/BT VOL control (5) adjusts the volume of the Bluetooth receiver
and the USB device respectively in the Master section.
2
2
6
6
4
4
Microphone/instrument section
The microphone / instrument section of Roadtrip 52 serves for con-
necting a wired microphone, an instrument, or a monophonic line
device. This section has the MIC 2 INPUT Combo socket (1) that can be
connected with either a balanced XLR or an unbalanced 1/4" TS cable.
1
1
NOTE: The XLR connectors of the Combo socket do not provide phan-
tom power. Therefore you can connect only dynamic or self powered
condenser microphones.
With the MIC 2 VOL (2) control you can adjust the level of the connected
source in the Master section.
With the TONE control (3) you can easily alter the sound of the
connected source: Turn the knob counterclockwise to attenuate the
high frequencies and to emphasize the lows. Turn the knob clockwise
to emphasize the high frequencies and to attenuate the lows.
Line in section
This section serves for connecting an external stereo device with line
level (e.g. a CD player or even a keyboard).
1
1
Connect the external device to the LINE IN sockets (2) using RCA
cables. Next adjust the volume of the connected source in the Master
section using the LINE VOL (1) control.
8
www.nowsonic.com
2
2
3
3
2
2
Werbung
