Vermeiren LiNX 400 Gebrauchsanweisung Seite 12

EN
NL
Table 1: Battery status description
Display
4.3.1 Charging
 Driving is prevented (inhibited) while the system is being charged.
 Charging is possible without switching the operating console ON. To see the
battery status indicator, switch it ON.
Plug the battery charger into the remote's XLR socket (9), see Figure 1.
The battery status indication now turns into a charge indication, see
figure 5. The battery charging state is shown by the yellow or green
blocks.
After a few seconds, the operating console turns to power-save
mode and the screen illumination decreases. Tapping on the screen
turns normal illumination on.
Description
Most blocks are
green
Blocks turn yellow
Blocks turn red
Yellow or green
blocks with
charging symbol
Meaning
Battery capacity:
more than 50% of
full capacity.
Battery capacity
level is
decreasing: less
than 50% of full
capacity
Battery almost
empty
Battery is charging.
Battery capacity
level is indicated
by colour.
Battery-charging indication
8
LiNX 400
2019-01
Operating console functions
Remarks
Consider
recharging the
battery soon.
Stop and recharge
now.
Wait until battery
is completely
charged.