Troubleshooting - Selve i-R Light Sensor Bedienungsanleitung

Troubleshooting

Problem
Drive is not functioning,
control light is not lit
Drive is not functioning,
control light is lit
Control light is flashing
Roller shutter does not
move down during sunlight
hours
The i-R Light Sensor does
not execute any automatic
movement commands
The roller shutters are
down and are not executing
any automatic movement
command
Cause
Batteries are dead
Batteries are incorrectly
inserted
Receiver outside the radio
range
Transmitter is not pro-
grammed in the receiver
Batteries are running out
The i-R Light Sensor is set
to manual mode
Sun threshold value is not
exceeded
The i-R Light Sensor is set
to manual mode
Breakage of glass was
activated
Solution
Insert new batteries
Insert batteries correctly
Reduce distance to the
receiver
Programme transmitter
Insert new batteries
Press the manual/automatic
button repeatedly until the
control light lights up green
Adjust sun threshold value
Press the manual/automatic
button repeatedly until the
control commands control
light lights up green
Motor needs to be moved
up manually. After that the
automatic is activated