Operation - fetra 2116 Montage- Und Betriebsanleitung

Transport equipment
The device should never be operated in lighting conditions below 50 Lux.
The operating temperature may be between -10°C and +40°C.
The pallet truck may only be used in well ventilated rooms or outdoors, the ground
conditions should be solid, level, free of holes, obstacles and not prone to skidding.
The lifting capacity specified on the type plate may not be exceeded, no unbalanced
loads may be lifted.
The operator must make sure that the pallet truck is used only as intended and that
any hazards for health and life of the user or other persons is avoided.
During usage, the operator is responsible for the pallet truck.
The operator must always make sure that the loads are in orderly condition;
only safely lifted loads may be moved.

Operation

Before operating the pallet truck, check the device for any damage. In particular the
wheels, the load bearing forks, the handle and the operating lever "lifting/lowering"
should be checked for good condition and/or good functioning.
Prior to operation make sure that no people are in the hazard zone.
We always recommend wearing safety shoes and protective gloves when working
with the pallet truck.
Driving
The pallet truck may be pulled or pushed by the handle.
Steering is done by swivelling the handle towards the required direction; the handle's
swivel range is approximately 115 degrees.
The pallet truck should be moved slowly and without abrupt movements.
14