Installing The Batteries; Battery Power Consumption; Battery Lifetime; Battery Charge Indicator - Restek ProFLOW 6000 Bedienungsanleitung

3.0 Installing the batteries

This unit uses two AA alkaline batteries.
To install batteries, extend the wire stand. Open the
cover. Insert the batteries with the polarity ( and )
correctly aligned. Close the cover. (Figures 2 and 3.)
Precautions for battery replacement:
• Load the new batteries with their polarity ( and ) aligned correctly.
• Do not use rechargeable batteries.

4.0 Battery power consumption

4.1 Battery lifetime

The battery lifetime is dependent on the number of options the user
has enabled.
The unit is shipped with the most energy-demanding options disabled
(Table II).
The power saving functions can be changed.
è See Section 8.2: USB Activation
è See Section 8.3: Adjust LCD Image Backlight
è See Section 8.6: Adjust Auto Shutoff Duration

4.2 Battery charge indicator

The unit includes a battery charge indicator. Replace batteries as
needed.
è See Section 8.4: Show Battery Charge Indicator
www.restek.com
Figure 2:
before opening battery door.
+ –
+ –
Table II:
NOTE: Store your ProFLOW 6000 in its protective storage case
following use. Do not store this manual or any other items on top
of the ProFLOW 6000 or the unit may turn on when the storage case
lid is closed.
- 4 -
Extend the wire stand
Default settings for the ProFLOW 6000
Auto shutoff duration
LCD backlight
USB port
– +
–
+
Figure 3
Insert the batteries
as marked.
6 minutes
0 (off)
disabled