Description; Safety Instructions; Advice - Schroff CPCI PICMG 2.16 Benutzerinformation

1.2 Description

This microcomputer packaging system consists of mechanics,
backplane, fan and power supply for a microprocessor system
based on the CPCI PICMG2.16bus. This microcomputer
packaging system has been designed for use in laboratories or in
a manufacturing environment where there are no extreme
conditions.
Please check the technical data of any parts which you wish to
assemble; they may restrict in particular the temperature range.
This unit has no valid approval for the complete unit. This
can only granted for the complete unit if approval is granted
for individual units or a batch. Such approvals are carried out
by VDE, TÜV, professional boards etc. according to each
application.
CAUTION!
The unit is designed in accordance with protection class 1!
It must therefore be operated only with protective GND/earth
connection!

1.3 Safety instructions

This microcomputer packaging system has been subjected to
extensive testing before delivery. However, this cannot guarantee
that the unit does not get damaged during transit. Check the
protection resistance and the CPCI voltage to ensure that your
system can not be destroyed by faulty operating voltages.
Caution:
The area of the system accessed after removing the mains/line
entrances is not a user area! Parts which can be touched may
be exposed to dangerous voltages. Initial testing, completion,
final testing or maintenance and repairs must be carried out by
trained engineers only.
The following tests have to be done before placing the
system in service:
Disconnect the main/line voltage!
At the rear:
Open the fuse holder with a screwdriver.
Is the correct fuse fitted?
The fuse value has been determined in factory for the
maximal power delivered by the power supply. The fuse
value must be adjusted to the real current of the global
system. Maximum values are 5 A slow.
At the front:
Are front panels mounted to all connector positions and
disk drive apertures?
Are fans front pannel and power supplies screwed on?
CPCI PICMG 2.16 10 U

1.4 Advice

Caution:
- please observe the safety instructions
- read operating instructions before system start-up!
- to be operated only on nets with PE conductor!
- putting into service by qualified personnel only!
Safety instructions
are meant to
- save lives
- prevent accidents
- save trouble
Please make sure to keep these operating instructions. It contains
valuable information pertaining to safety.
It
- supports operators, users, service staff and technical personnel
during preparatory work, installation and system start-up, and it
helps understand the functions of the system
- gives hints as to special operating conditions
- explains the displays and control elements
- informs about all essential technical data
Technical changes and upgrades will be implemented without
prior annoucement, provided that they serve technical progress.
This product is intended exclusively for commercial and industrial
applications. It is not designed for use in connection with
life-supporting medical equipment or other critical applications.
This documentation has been prepared and checked with
greatest care. However, we cannot give guarantee for its
complete correctness, for any damage resulting from
misprint or improper use.
In the case of improper use all warranty claims will lapse!
1.3
Attention
Danger to life