Instruction - HOESCH ERGO+ Montage- Und Bedienungsanweisung

Instruction

GB
10
On/Off – all function
If gutter lighting function is available, it is started automatically
On/Off the light
The button is used to switch on/off aditional LED lights in the bathtub.
Function is available only if the water level is above the LED lights
If you switch off this button, you can still use the gutter lighting function.
The colour usage instruction – please look at the instruction of Ergo bathtub with whirpool
system.
Light colour changing switch
It is possible to turn on the three automatic chromotherapy programmes. The color of lights can be
switched off only if the LED lights are on.
Additionally, this button can be used as on/off switch for all lighting.
■ Red
■ Orange
■ Yellow
■ Green
■ Blue
■ Indygo
■ Violet
■ Chromotherapy programme I
■ Chromotherapy programme II/III – frequency and time of every colour were set to regenerate the
body, soften the sickness symptoms and strengthen life energy.
Pop up open/close
To run the PopUp function, you should fi rst switch on control with the on/off switch.
The time of openning/closing is about 5 seconds.
Restarting during this waiting time (5 sec.) is not possible by electronic system.
ERGO+ On/Off – Air massage
TERGUM On/Off – Whirlpower
The Whirlpower button becomes active once the whirl system is switched on.
The Whirlpower function switches off automatically when the whirl system is switched off.
On/Off – Water massage
– changing the light colour every 5 seconds.