Product Overview; Switch Off; Stadion User Guide - Urbanears Stadion Benutzerhandbuch

STADION USER MANUAL

PRODUCT OVERVIEW

1. Ear hooks
2. EarClick technology
3. Microphone
4. Play/Pause button
5. Plus volume control
6. Minus volume control
7. LED indicator
8. Micro USB jack
SWITCH ON
Press and hold Play/Pause button
for 2 seconds.

SWITCH OFF

Press and hold Play/Pause button
for 2 seconds.
CONNECTING TO A BLUETOOTH®
ENABLED SOUND SOURCE
Follow these instructions when pairing
your headset with a sound source
(smartphone, tablet or computer) for the
first time.
1. Activate Bluetooth® on your sound
source according to its user manual.
4
8
6 4 5
2. If your headset is powered off:
Press and hold the Play/Pause button for
5 seconds.
If your headset is powered on: Turn it
off, then press and hold the Play/Pause
button for 5 seconds.
When your headset has entered into pair-
ing mode the LED indicator will blink blue
and the headset will beep 2 times.
When your headset has successfully
connected with a sound source, the LED
indicator will blink white and the headset
will beep 1 time.
2
7
After initial paring, the two devices
will auto-connect when they are
switched on and within range of each
other (≤ 10 meters).
CHARGING
Plug your headset into a USB power
source using the micro USB cable.
The LED indicator light is red while the
headset is charging, and white when fully
charged.
ENG
1
3