Product Components - Hoover Syrene Bedienungsanleitung

The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The symbol on the product indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For
more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. Handle
B ON/OFF Button
C. Permanent Exhaust Filter
D. Bin Door
E. Bin Door Release Button
F. Nozzle
G. Nozzle Mode Selector
H. Parking Lock
GETTING TO KNOW YOUR CLEANER
1. Remove all components from the packaging. Assemble the cleaner handle and fix in position with
the supplied screw. [1,2]
2. Open the bin door [8] and check if the dust bin is correctly fitted.
3. Fit the nozzle. [3]
4. For first use, charge your cleaner for 24 Hrs and use until completely discharged. After first use the
normal charging time is 12 Hrs. [4]
USING YOUR CLEANER
Main Cleaner
1. Prepare your cleaner for use by releasing the parking lock on the nozzle. [5]
2. Turn the cleaner on by pressing the ON/OFF Button to the following: [7]
- Push one time: normal power
- Push second time: turbo power
- Push third time: product off
3. Use the nozzle mode selector to change between carpet and hard floor mode. [6]
ON/OFF Button
This cleaner is equipped with a LED display. During charging, the indicator will be red, after fully charged,
the indicator will change to blue. When the product is working, the indicator will change to blue, and when
the batteries are fully discharged, the indicator will flash for around 20 seconds before cleaner switches off
automatically.
I. Charge Socket
J. Bin Cover
K. Filter Mesh
L. Filter
M. Dust Bin
N. Charger
8
GB